PRODUCT

Hempel Paint

AkzoNobel Paint

Sherwin-Williams Paint

PPG Paint

JOTUN Paint

Other coatings

Search
%{tishi_zhanwei}%

SIGMACOVER 522

Two-component polyamide cured epoxy iron oxide primer/sealer topcoat.

Details

SIGMADUR 550

Two-component aliphatic polyurethane topcoat.

Details

Hai Hong Acrylic Road Marking Paint 29680

Hai Hong Acrylic Road Marking Paint 29680 is a fast-drying road marking coating formulated with specially formulated high polymer as the base material.

Details

Hempadur MultiStrength 35530

The Hempadur MultiStrength 35530 is a two-component, solvent-free, thick paste, polyurethane-cured epoxy coating. The cured paint film has good resistance to fresh water, seawater, crude oil, and abrasion.

Details

Hempadur 35560

Hempadur 35560 is a solvent free, high-build, polyamine adduct cured epoxy paint, which cures to a coating with good resistance to fresh water.

Details

Hempel's Epoxy Filler 357CN

Hempel's Epoxy Filler 357CN is a solvent free epoxy filler, which have following performances: eco-friendly; excellent filling in performance; easy to apply; high DFT to 5mm without sagging.

Details

Hempadur MultiStrength GF 35870

The Hempadur MultiStrength GF 35870 is an amine-cured epoxy coating. This product is reinforced with glass flakes, resulting in a hard, impact-resistant, and wear-resistant coating after curing. It has good resistance to seawater and splashes from gasoline and related products. It is suitable for early exposure to water and continues to cure underwater.

Details

Hempel's Vinyl Ester GF 35910

Hempel's Vinyl Ester GF is a two component cold cured vinyl ester/acrylic copolymer, reinforced with glass flakes. Applicable in thick coats by standard heavy duty airless spray equipment.

Details

Hempacore One 43600

Hempacore One is a one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires in a wide range of fire durations. It is suitable for in-shop and on-site applications, interior and exterior use.

Details

Hempadur 45141

The Hempadur 45141 is a two-component polyamide adduct cured epoxy paint, featuring good wettability and a low water permeability rate.

Details

Hempadur Hi-Build 45200

Hempadur HI-Build 45200 is a two-component, high build epoxy paint. It forms a hard and tough coating resistant to seawater, mineral oils and splashes from petrol and related products.

Details

Hempadur Hi-Build 4520C

The Hempadur Hi-Build 4520C is a thick paste epoxy paint that uses a two-component polyamide adduct curing agent.

Details

Hempadur Mastic 45880

The Hempadur Mastic 45880 is a high solid modified epoxy resin coating cured with polyamide.

Details

Hempadur Mastic 4588W

The Hempadur Mastic 4588W is a two-component high solid content epoxy thick paste coating.

Details

Hempatex HI-Build 46330

Hempatex HI-Build 46330 is based on chlorinated rubber. Physically drying. Resistant to salt water, splashes of mineral oils, aliphatic solvents and a wide range of chemicals, but not to animal and vegetable oils or aromatic solvents.

Details

Hempatex HI-Build 4641C

The Hempatex HI-Build 4641C is a physically drying thick paste coating, based on acrylic resin, with good color retention. This product contains zinc phosphate slow-release pigment, and its paint film is resistant to seawater, aliphatic solvent, and contamination from animal and vegetable oils.

Details

Hempel's Epoxy MIO 471CN

The Hempel's Epoxy MIO 471CN is a two-component, high solid content, low VOC epoxy thick paint that can form a hard film. It uses mica iron oxide as a pigment, enhancing the shielding effect.

Details

Hempadur Mastic 47550

The Hempadur Mastic 47550 is a two-component, high solid content epoxy thick paste paint that can form a hard film, featuring good wettability and low-temperature curing performance.

Details
< 1...8910...13 >