PRODUCT

Hempel Paint

AkzoNobel Paint

Sherwin-Williams Paint

PPG Paint

JOTUN Paint

Other coatings

Search
%{tishi_zhanwei}%

Jotacote F60

This is a two-component polyurethane cured pure epoxy coating. It meets the requirements for optimal adhesion on many surfaces as a marine primer. It can be used as a primer, intermediate coat, topcoat, or single-layer coating system in atmospheric and submerged environments. Suitable for properly treated carbon steel, steel with workshop primer, stainless steel, aluminum, galvanized steel, fiberglass reinforced polyester, and thermally sprayed zinc surfaces. The applicable temperature range is from low temperature -196°C to 210°C, for both insulated and non-insulated surfaces.

Details

Barrier 75

This is a two-component polyurethane curing zinc-rich epoxy coating. It is a fast-drying product with a high zinc content. It meets the requirements of the Chinese standard HG/T 3668-2009 for zinc powder specification level two. When used in conjunction with other coatings, it provides excellent corrosion resistance. It is used as a primer in atmospheric environments. It is suitable for the repair of properly treated carbon steel, inorganic zinc silicate coatings, and worn galvanized steel surfaces. It can be applied when the substrate temperature is below zero degrees. The zinc powder in this product complies with ASTM D520, Type II standards.

Details

Barrier 80 S

This is a two-component polyurethane curing zinc-rich epoxy coating. It is a fast-drying product with high solid content and high zinc powder content. It meets the composition requirements of SSPC Paint 20 Level 2 and ISO 12944-5. When used in conjunction with other coatings, it provides excellent corrosion resistance. It is used as a primer in atmospheric environments. It is suitable for the repair of carbon steel, inorganic zinc silicate coatings, and worn galvanized steel substrates. The zinc powder in this product complies with ASTM D520, Type II standards.

Details

Jotamastic 85

This is a versatile, highly adaptable, and efficient high surface tolerance primer that can be used on various construction sites at different temperatures and can accept overcoating in a short period of time. It is an epoxy mastic thick paint developed based on over 35 years of experience in corrosion protection. It is a high solid content product. It can be used as a primer in atmospheric and submerged environments. It is suitable for properly treated surfaces of carbon steel, galvanized steel, stainless steel, aluminum, and a range of old coatings. It can be applied to substrate surfaces below zero degrees Celsius.

Details

Penguard Pro GF

This is a two-component amine-cured wear-resistant epoxy glass flake coating. It is a thick paste product characterized by low surface treatment and high solid content. It is a versatile coating specifically designed for new construction projects. It can be used as a primer, intermediate coat, topcoat, or single-layer coating system in atmospheric and submerged environments. It is suitable for properly treated substrates of carbon steel, stainless steel, aluminum, galvanized steel, and thermally sprayed zinc.

Details

Hardtop AX

This is a two-component chemically cured aliphatic acrylic polyurethane coating. It has a high gloss film with excellent gloss retention. It exhibits good chemical resistance. This product has a high solid content. It does not contain solvents listed in the "Hazardous Air Pollutants (HAPs) list." A small amount of these solvents may be introduced during the adjustment of certain colors. It is used as a topcoat in atmospheric environments.

Details

Hardtop XP

This is a two-component chemically cured aliphatic acrylic polyurethane coating. It has a glossy surface finish and excellent gloss retention. It is a high solid content product. It has good application performance and is not prone to dry spraying. It is used as a topcoat in atmospheric environments.

Details

SteelMaster 1200WF

This is a one component waterborne acrylic thin film intumescent coating. Independently approved for fire protection of structural steel exposed to cellulosic fire. Can be used as mid coat or finish coat in atmospheric environments. Suitable on approved primers on carbon steel substrates.

Details

SIGMAZINC 109 HS VOC

Two-component high solid polyamide adduct cured epoxy zinc-rich primer, low volatile organic compound concentration version, complies with the Environmental Protection Department regulations of the Hong Kong Special Administrative Region of the People's Republic of China. VOC value 250 grams/liter.

Details

SIGMADUR CLEARCOAT

Two-component aliphatic acrylic polyurethane high-gloss varnish.

Details

SIGMAPRIME 200

Multi-functional universal epoxy anti-corrosion primer based on pure epoxy technology.

Details

SIGMACOVER 246

Two-component polyamide cured thick film epoxy zinc phosphate primer/intermediate paint, a conventional epoxy paint used as a protective coating system for steel structures exposed to atmospheric conditions.

Details

SIGMAFAST 278

Two-component, high solids, zinc phosphate epoxy primer and buildcoat

Details

SIGMACOVER 280

Multi-functional universal epoxy anti-corrosion primer based on pure epoxy technology.

Details

SIGMACOVER 380

Multi-functional universal epoxy anti-corrosion primer based on pure epoxy technology. Suitable for general pure epoxy coating primer for ship ballast water tanks, decks, freeboards, superstructures, and hull outer plates.

Details

AMERLOCK 400

Two-component high solid epoxy paint, a high-performance universal epoxy paint that can also serve as a primer.

Details

SIGMACOVER 410

Two-component high solid polyamide cured epoxy thick paste paint, also available in a mica iron oxide version.

Details

SIGMADUR 520

Two-component thick paste aliphatic polyurethane semi-gloss paint.

Details
< 1...789...13 >